Ram Mount for 2013 Burgman 650

[sitrap]

Have new Tomtom Rider 400 satnav I picked up at the gadget show this weekend, comes with a Ram Mount, but need a base for the Burgman. Ram-mount website says the brake reservoir version is not suitable for 2012/2013 650s. No alternative mentioned. Any ideas ?

[Steve_D]

When I had my 2011 Burgman, I mounted a suction base disc on the flat part of the top of the dash. I then mounted my setup onto that with a suction fitting the same as you would use for a car windscreen. I used a tethering cord in case it came loose but it never did in all the time I used it.

[michaelphillips]

i think kayz1 has made a brake reservoir version with many holes for various reservoir top situations

[Bluebottle]

KayZ1 is your kiddy, but I think he is away on an adventure at the moment, have a search of his posts for details.

I did mine before I met him, from these people - cheaper than RAM but fully compatible if you order the same ball size.


There site is http://www.ultimate-mobiles.co.uk

I chose a stalk mount

[michaelphillips]

same people i got my triple tree ball mount from good service

[maccecht]

I made one from a bit of flat SS just drilled it to fit the Reservoir bolts and fit the Ram mount.

[spaceprobe]

I use this one on the SYM with my Rider 2 and you can see its got lots of options re the screws so are you sure it wont fit?

http://www.ram-mount.co.uk/reservoir-co ... -1567.html

[Gerard C]

I've got that same mount Mr Probe. Used it on my 2010 and on the 2014 650's.

[Scootles]

Just fitted the Ram brake reservoir mount on my Burgman 400 today. I could have used the slots at the edge of the mount, but in the end I drilled an extra hole on the centreline to suit my reservoir. Looks pretty tidy and secure.

[bornagainbiker]

I just used and still use my supplied TomTom suction screen mount or my waterproof case with a screen mount suction adaptor. The B650 screen is fairly flat and as yet neither has fallen off, even tested down several cobbled streets but I do have a safety cord attached just in-case.