Page 1 of 1
Oil and filter change
Posted: Sun Jul 21, 2013 9:53 pm
by mjf65
Although the bike I'm buying (burgman 400 2011) it has only done just over 1k since its last service it's just over 12 months so I want to do the oil and filter, how easy is it compared to my previous 1250 bandit which was simples. Does it have the usual canister type?
Re: Oil and filter change
Posted: Sun Jul 21, 2013 9:59 pm
by poldark
Yes and yes, get a service manual, check Burgman USA and micbergsma youtube videos.
You Tube
Re: Oil and filter change
Posted: Mon Jul 22, 2013 3:57 pm
by PD110961
seems a bit early to change the oil and filter after 1000 miles? i just did my 2002 400 burger.. drain nut easy to get to, 3 off 8mm hex studs to remove filter cover... change filter, replace all nuts etc, put 2 litres in.. job done.
Re: Oil and filter change
Posted: Mon Jul 22, 2013 10:20 pm
by Data
mjf, the filter is a paper cartridge type not the cannister sort. It's very very easy to change it though. You need to change the inner filter seal too that does not come with the filter. The outer seal on the filter cannister cover can go two or three time before you need to replace it. But alway change the inner seal as that maintains your oil pressure.