J Costa Variators

[Funkycowie]

Funky, what weights are you running now? Even at the same weight, the Sliders will be quicker off the mark, as they allow the two variator pulley halves to move a bit further apart, lowering your initial gearing. Free acceleration improvement!

differential of terms funky calling the rollers as weights and the sliders as the little 4 piece parts that sit in the sides of variators, they tend to wear more when using dr pulley weights as they are forced out more, so worth getting the dr pulley 4 x sliders as well as dr pulley weights

The Dr Pulley roller weights I use are 16gs SkuTor

I do need to get eh Dr Pulley Sliders as the Standards have worn and are a little rattly

[michaelphillips]

your sliders are like gold dust funky Sliding pieces SP2515-M

http://www.sip-scootershop.com/en/produ ... r+_sr2515m" onclick="window.open(this.href);return false; ARE AWAITING STOCK IN A WEEK but very good price

or you could email scooter assassins http://stores.ebay.co.uk/scooter-assassins-worldwide" onclick="window.open(this.href);return false; they got some stock i wanted

germany are expensive http://www.drpulley.info/shop/product_i ... cts_id=744" onclick="window.open(this.href);return false;

you went low on 16gms,

[Funkycowie]

Stock is 18gms

[michaelphillips]

Stock is 18gms

sorry just going by spec sheet i thought they were 19gms
T-­‐MAX500 25x15 19gr. SR2515x8
T-­‐MAX530 25x15 19gr. SR2515x8

[Funkycowie]

maybe I was wrong then

[michaelphillips]

maybe I was wrong then

dont matter as long as you happy with them, i went to 24gms on the nexus and was ok a to b but clutch heat build up, and lost out on top end, the scoot wanted to go faster but weights were too low, so bought some 28gms and mixed them to make 26 total, that worked superb. so as long as you happy with your weights, good to know for other users

[frankiej1949]

Hi Mike
Having trouble with the PM the text box is not showing up?????? I have taken your advice and ordered the Dr Pulley sliders and rollers 62 euros, a bargain for a performance mod, lol. Thanks for your help.

[michaelphillips]

Hi Mike
Having trouble with the PM the text box is not showing up?????? I have taken your advice and ordered the Dr Pulley sliders and rollers 62 euros, a bargain for a performance mod, lol. Thanks for your help.

good lad, so you got the brisk plugs and now the variator bits, did you do the air filter well done lad, must post your findings though for other muppets to smile at