Burgman k3 bar weights
-
masterchop
- Posts: 390
- Joined: Fri Jun 19, 2009 12:19 am
- Current Ride: Burgman K3 400
- Location: Portsmouth
Burgman k3 bar weights
Does anyone know the id of the handlebars on a k3? I need new bar end weights. Can't seem to find confirmation anywhere.
Single cylinder rumbler
-
Whatsisname
- Benefactor
- Posts: 939
- Joined: Thu Apr 16, 2009 11:06 pm
- Current Ride: Burgman 400 K5
- Location: Sunny Bournemouth
Re: Burgman k3 bar weights
The Suzuki-GB site lists a chrome one at £20 each!
https://www.suzuki-gb.co.uk/motorcycles ... -large:44/" onclick="window.open(this.href);return false;
Have you looked on fleabay?
https://www.suzuki-gb.co.uk/motorcycles ... -large:44/" onclick="window.open(this.href);return false;
Have you looked on fleabay?
I wake up every morning with a smile upon my face,
My natural exuberance spills out all over the place!
My natural exuberance spills out all over the place!
-
masterchop
- Posts: 390
- Joined: Fri Jun 19, 2009 12:19 am
- Current Ride: Burgman K3 400
- Location: Portsmouth
Re: Burgman k3 bar weights
Yep they can go suck for that price. Problem is it still doesn't specify the ID of the bar. Think I'll just have to measure up and stop being lazy. Cheers anyway.
Single cylinder rumbler
-
masterchop
- Posts: 390
- Joined: Fri Jun 19, 2009 12:19 am
- Current Ride: Burgman K3 400
- Location: Portsmouth
Re: Burgman k3 bar weights
It's a pain to measure as the grips overlap the bar. Can't really get in to measure. Most bar ends on sale seem to just specify the ID. Not model suitability. Considering you can pickup bar ends for a tenner a pair ..40 quid OEM seems a bit of a rip.
Single cylinder rumbler
-
k44rll
- Posts: 11
- Joined: Sat Apr 05, 2014 4:35 pm
- Current Ride: Suzuki Burgman AN400 K9
- Location: Shropshire
- Contact:
Re: Burgman k3 bar weights
My experience with bar ends is that you can't beat the original ones that are the correct weight for the bike in question, agree this isn't the cheapest option but bought cheap bar ends in the past and ended up with vibrations or wobble at speed
If you decide to go for universal ones go for steel not alloy, any of the universal ones for a 22mm steel bar and rubber fitting that compresses like below should fit the standard Burgman bars altho clearance on the throttle grip could be an issue with non oe parts
Karl
If you decide to go for universal ones go for steel not alloy, any of the universal ones for a 22mm steel bar and rubber fitting that compresses like below should fit the standard Burgman bars altho clearance on the throttle grip could be an issue with non oe parts
Karl
http://www.suzukiburgman.co.uk" onclick="window.open(this.href);return false;
http://www.suzukivanvan.co.uk" onclick="window.open(this.href);return false;
http://www.vstromadventure.co.uk" onclick="window.open(this.href);return false;
http://www.suzukivanvan.co.uk" onclick="window.open(this.href);return false;
http://www.vstromadventure.co.uk" onclick="window.open(this.href);return false;
-
masterchop
- Posts: 390
- Joined: Fri Jun 19, 2009 12:19 am
- Current Ride: Burgman K3 400
- Location: Portsmouth
Re: Burgman k3 bar weights
Cheers Karl. Might have to bite the bullet and go OEM. suttons do them around 30 the pair.
Single cylinder rumbler
-
burgerman
- Benefactor
- Posts: 573
- Joined: Sun May 24, 2009 10:44 pm
- Current Ride: Honda FJS600 Silverwing
- Location: Louth, Lincs
Re: Burgman k3 bar weights
These seem a bit cheaper, but they're from Hong Kong!! 
http://www.ebay.co.uk/ctm/Suzuki-Burgma ... 0-Bar-End-" onclick="window.open(this.href);return false;
http://www.ebay.co.uk/ctm/Suzuki-Burgma ... 0-Bar-End-" onclick="window.open(this.href);return false;
As I grow older, my mind doesn't just wander......sometimes it buggers off completely!!
You can't avoid growing up, but you can be immature all your life!
You can't avoid growing up, but you can be immature all your life!
-
michaelphillips
- Benefactor
- Posts: 4898
- Joined: Fri Aug 24, 2012 9:14 pm
- Current Ride: Daelim S250 Advance
- Location: orpington kent
Re: Burgman k3 bar weights
firstly have you tried to take them off, as they can be a pain to get off
I cant seem to remember.. I don't know where I'm going, but I'm on my way.
-
masterchop
- Posts: 390
- Joined: Fri Jun 19, 2009 12:19 am
- Current Ride: Burgman K3 400
- Location: Portsmouth
Re: Burgman k3 bar weights
Went for the OEM begrudgingly. But 28 quid for the pair rather than 20 a pop.
Oh well guess the bike is worth it.
Oh well guess the bike is worth it.
Single cylinder rumbler
-
Hexatony 2
- Benefactor
- Posts: 135
- Joined: Thu May 27, 2010 11:11 pm
- Current Ride: Hexagon 125
- Location: Scunthorpe. LIncs
Re: Burgman k3 bar weights
What is the problem with the original end weights? When the chrome started to peel off my bar weights, I took it all off with emery cloth and painted them black. I think they look better than the originals.